Home Improvement, Remodeling and Repair @ Builders Websource. Home design software, advice, tools, videos, tech notes, links and more!

Search: 

Home Page | Books | BuildersTALK | Building a Dream | Green Building | Links | Software | Tech Notes | Tools | Contact

Messages and Online Forum Q&A

If you find the answer to this question useful, kindly CLICK TO PAY here.



Knowledge


BuildersTALK
Building|Dream
Green Building
How-To Books
Links (Web)
Newsletter
Tech Notes
Videos

Software


BeamChek
Bidding
CAD | AutoCAD
Estimating
EZHomeBuild
Home Design
Landscaping
Lighting Design
PrioSoft
Resi-Cost
Structural

Specialty Tools


CrackMON
Tools
WatrLevel

Support & Info


About Us
Advertise
Contact Us
FAQ
Publish
Services
Support

 

Advise needed - Bath Subfloor

From: grmehrl@aol.com
Category: Bath
Remote Name: 205.175.225.24
Date: 19 Feb 2003
Time: 09:37 AM

Comments

I recently discovered my upstairs toilet was leaking, and had dripped through the subfloor to the ceiling below....somehow it seems the closet bolts loosened enough to break the wax ring seal. I replaced the wax ring and reinstalled the toilet. Unfortunately, I now have a 12" hole in the first floor ceiling directly under the upstairs toilet. My question has to do with the subfloor. The wet area is minimal....about 14" in diameter, which has now dried out....so the leak is fixed. This area is dark & stained, but it still seems structurally sound, especially now that it's dry. The flange is still tightly screwed down, and does not move at all, the toilet is solidly attached too.........however, there are few small spots in the formerly wet area where I can push a knife edge through from the bottom side, but the large majority of the area is solid . Here is my issue....the house is only seven years old, and the finished flooring looks like new....I would like to avoid ripping it up to replace this small piece of subfloor if possible. Does the damage I described warrant doing this? Or is there a treatment from below that would work....Or will it be OK as is?

 

Article Tools

BuildersTALK


Ask an Expert
Recent Questions
Click to Pay

Archives


2006-2007
Oct-Dec 2002
Jul-Sep 2002
Jan-Jun 2002
Jul-Dec 2001
Jan-Jun 2001
1999-2000

 

 


ASTM International