 |
Messages and Online Forum Q&A
| If you find the answer to this question useful, kindly CLICK
TO PAY here. |
|
|
|
 |
|
|
Re: repainting steel window framesFrom: info@builderswebsource.com
Category: Painting and Wallcoverings
Remote Name: 63.198.181.43
Date: 08 Feb 2003
Time: 08:46 PM
CommentsRenovating old still window frames is painstaking work, particularly when they're peeling and rusty. As with any painting project, proper surface preparation is the most important part. First, remove all existing paint and rust down to the bare metal. Stiff wire brush attachments compatible with electric drills may be required. Carefully wet sand all surfaces with aluminum oxide sand paper to provide a smooth finish. If necessary, remove all signs of rust using Rust-Oleum Rust Stripper. Once the sufaces are clean and dry, apply 1-2 coats of Rust-Oleum Clean Metal Primer. According to the company, "Clean Metal Primer provides excellent rust prevention on clean, lightly rusted or previously painted metal. It bonds tightly to metal to provide superb adhesion for finishes. Easy to cover with any color topcoat." Once the primer has thoroughly dried, apply 1-2 topcoats of Rust-Oleum Protective Enamel (available in Gloss, Semi-Gloss and Flat) or Satin Enamel Finish. Rust-Oleum products contain special rust inhibitors that lock out moisture and corrosion-causing elements, helping to retard the recurrance of rust. Two-part epoxy type enamels are also available. These provide the best protection and longevity, but are more expensive and harder to apply. For more information on these and other Rust-Oleum products, visit http://www.rustoleum.com - Builders Websource
|
|
