 |
Messages and Online Forum Q&A
| If you find the answer to this question useful, kindly CLICK
TO PAY here. |
|
|
|
 |
|
|
Re: plumbing noiseFrom: info@builderswebsource.com
Category: Plumbing
Remote Name: 63.198.181.43
Date: 06 Sep 2002
Time: 02:58 AM
CommentsWhen you say that your pipes are noisy when turning on your water, there are many different types of noises. If the noise is continuous (not just temporary when you turn on the faucet), then you're probably hearing the friction of the water passing at high speeds through your pipes (probably copper). The best way to reduce this noise is to increase the size of your pipes (expensive and not easy to do), or reduce your pressure (assuming your pressure is excessive). You can also reduce the flow by adding water restrictors on your faucets. If your pressure is quite high, you can add a pressure regulator after your exterior shutoff valve. This will lower the pressure in your pipes, reducing the velocity. On the other hand, if your problem is water hammer, then you'll need to find the source of the trouble and may need to add a water hammer arrestor. For more information on plumbing noises and water hammer, see our TechNote on this subject. A nominal fee applies. Builders Websource.
|
|
